Processing and Characterization of Ni2MnSn FSMA

Autori

  • Ajit Behera National Institute of Technology Rourkela-769008 Odisha, India
  • S. C. Mishra

Parole chiave:

FSMA, Ni2MnSn, transformation temperature

Abstract

Among Ferromagnetic Shape Memory alloys (FSMAs), Ni2MnSn Heusler alloys owing to occurrence of large magnetic field induced strain (> 10%) along with other interesting properties like premartensitic transition, high transformation temperature, large magnetocaloric effect and low stress of twin variant rearrangement. The prominent challenges facing the design and utilization of these specialized alloys are a limited range of operating temperatures, phase transformations that have high sensitivity to variations in composition, brittleness of the alloys, and changes in transformation temperatures. The functional behaviors of these alloys are as actuators, magneto-mechanical transducers, switching devices, etc. In the present study, the martensitic microstructures of Ni50Mn37.5Sn12.5 FSMAs are investigated by optical microscopy, X-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. Among the most important martensites that exist in these alloys are the 5M tetragonal, 7M orthorhombic (modulated structures) and NM tetragonal (non-modulated structure), etc. Differential scanning calorimeter is used for determining the transformation temperatures under zero stress. Crystal structures of the samples are determined by X-ray diffraction patterns using Cu-Ká radiations. Transmission electron microscopy study of this alloy revealed the presence of two martensite phases, i.e., modulated and non-modulated phases. Keywords:  FSMA, Ni2MnSn, transformation temperature

Biografia autore

  • Ajit Behera, National Institute of Technology Rourkela-769008 Odisha, India
    Research ScholarDepartment of metallurgical & materials EngineeringNational Institute of TechnologyRourkela-769008Odisha, India

Dowloads

Pubblicato

2012-08-01

Fascicolo

V. 2 N. 2 (2012)

Sezione

Review Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.