Understanding the Delamination and Its Effect on Charpy Impact Energy in Thick Wall Linepipe Steel

作者

  • Raghu Shant
  • J Raghu Shant
  • Rajesh K Goyal
  • T S Kathayat

##semicolon##

Impact energy##common.commaListSeparator## toughness##common.commaListSeparator## centerline segregation##common.commaListSeparator## fracture surface##common.commaListSeparator## anisotropy##common.commaListSeparator## delamination##common.commaListSeparator## banded microstructure##common.commaListSeparator## TMCP

摘要

The thick wall linepipes produced from thermo-mechanical-controlled hot-rolled high-strength low-alloy steel (HSLA) plates are characterized by heterogeneity of microstructures through thickness. This microstructural heterogeneity results delamination and is responsible for substantial differences in the toughness behavior of the linepipe steel. The objective of this research work was to investigate these differences in impact energy using Charpy V-notch impact test in correlation with microscopic observations on fractured surfaces of the selected Charpy V-notch specimens. A thick plate of linepipe steel having grade API 5L X65MS PSL2 (API: American Petroleum Institute) was selected for present study. Keywords: Impact energy, toughness, centerline segregation, fracture surface, anisotropy, delamination, banded microstructure, TMCP

作者簡介

  • Raghu Shant
    Research and DevelopmentSr. Manager

下載

出版日期

2014-03-14

期號

卷 4 期 1 (2014)

分類

Review Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.