Technological Procedure for Recycling of PET Waste to Achieve the Sustainable Environment Concept

Autor/innen

  • Ali I. Al-Mosawi

Abstract

 AbstractIn this research, polyethylene terephthalate bottles (PET) waste were added to styrene-butadiene rubber (SBR) to manufacture road bumps, as a technological procedure for recycling this waste In order to maintain a clean and sustainable environment. Polyethylene terephthalate bottles were cut as grooved strips and added to bump SBR batch with various percentages (0–100 pphr). Mechanical tests were performed before and after the addition of PET waste includes: tensile strength, hardness, and resilience. Nanoparticles of carbon black, zinc oxide and sulfur were used, and compare the results with samples with micro particles additions. The result shows that the developed and manufactured bump SBR in this research conforms to the mechanical characteristics of the original bump model especially with nanoparticles additives, and the best results obtained with the nanoparticles additions.Keywords: PET waste, road bumps, SBR, sustainable environmentCite this Article Ali I. Al-Mosawi. Technological Procedure for Recycling of PET Waste to Achieve the Sustainable Environment Concept. Journal of Nanoscience, Nanoengineering and Applications. 2017; 7(2): 29–34p.    

Downloads

Veröffentlicht

2017-09-28

Ausgabe

Bd. 7 Nr. 2 (2017)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.