Solution Combustion Synthesis of Nanocrystalline and High-K Dielectric Lanthanum Oxide
##semicolon##
Solution combustion synthesis##common.commaListSeparator## X-ray diffraction (xrd)##common.commaListSeparator## scanning electron microscopy (sem)##common.commaListSeparator## Brumanuer Emmet Teller analysis (BET)##common.commaListSeparator## thermal gravimetric-differential thermal analysis (TG-DTA).摘要
The present paper describes a simple and eco-friendly chemical method of lanthanum oxide or lanthania (La2O3) nanoparticles by the solution combustion synthesis based on urea. The fuel urea is varied for different fuel to oxidizer ratios (F/O) or Ψ = 0.5 to 1.5 in the steps of 0.25. The average crystallite size of La2O3 nanoparticles was estimated from the full width half maximum of the X-ray diffraction peaks of powders using Scherer’s formula. Particle size is estimated using Brumauer Emmett Teller (BET) analysis. Thermal analysis was done by thermal gravimetric-differential thermal analyzer and results obtained. The morphological studies were carried out with SEM and AFM. The particle size distribution was done with particle size analyzer. Keywords: Solution combustion synthesis, X-ray diffraction (xrd), scanning electron microscopy (sem), Brumanuer Emmet Teller analysis (BET), thermal gravimetric-differential thermal analysis (TG-DTA).出版日期
期號
分類
授權條款
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
