Design and Simulation of Z-Source Inverter Fed Brushless DC Motor Drive Supplied With Fuel Cell for Automotive Applications
Nøgleord:
(BLDC) brushless dc motor - (ZSI) impedance source inverter - fuel cell - Shoot-trough duty cycle - conventional inverterResumé
This paper presents design and simulation of Z-source inverter fed brushless DC motor drive supplied with fuel cell for automotive applications. The brushless DC (BLDC) motor are used due to many advantages such as high efficiency, high torque, high reliability, high-power density, lower maintenance compared to other motors in electric transport applications. The BLDC motor drive is with voltage source inverter (VSI) or current source inverter (CSI) because of low efficiency, high thermal loss, and inductor and capacitor large values inherently unreliable. Also shoot-through in DC bus in VSI and open circuit in DC link in CSI causes damage to the power source connected to the inverter, such as fuel cells, solar cells or the battery. In VSI and CSI are for increasing and decreasing the output voltage needs to separate DC-DC Buck and Boost converter. But their disadvantages have been overcome in the Z-source inverter using two inductors and capacitors. Also the Z-source inverter has inherent protection against shoot-through in the DC bus and boost voltage ability. In this paper the BLDC motor drive supplied to the fuel cell via a Z-source inverter are designed and evaluated. The simulation results show that the output voltage of fuel cell less can be settled in desired zone with changing capacitors and inductors and operating duty cycle. Keywords: Brushless DC motor (BLDC), impedance source inverter (ZSI), fuel cell, Shoot-through duty cycle, conventional inverterCite this Article Mohsen Teimoori, Sayyed Hossein Edjtahed, Abolfazl Halvaei Niasar et al. Design and Simulation of Z-Source Inverter Fed Brushless DC Motor Drive Supplied With Fuel Cell for Automotive Applications. Journal of Power Electronics and Power Systems. 2016; 6(3): 60–71p.Downloads
Publiceret
Nummer
Sektion
Licens
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |