Simulation of Sub-synchronous Resonance (SSR), and Mitigation of SSR by Static Synchronous Series Compensator with Lead Lag Compensator
Schlagwörter:
Lead lag compensator, quadrature voltage, SSR, static synchronous series compensator (SSSC), synchronous generator.Abstract
This research work presents a narrative method of alleviating the SSR problem using a static synchronous series compensator (SSSC). This method is based on using the SSSC to inject unbalanced series quadrature voltages and unbalanced shunt reactive currents in transmission line just after clearing faults. When the sub-synchronous oscillations drive unsymmetrical phase currents, the developed electromagnetic torque will be lower than the condition when three-phase currents are symmetrical. The unsymmetrical currents result in a lower coupling strength between the mechanical and electrical systems at asynchronous oscillations. Therefore, the energy exchange between the electrical and mechanical systems at sub-synchronous oscillations will be suppressed, thus avoiding build-up of torsional stresses on the generator shaft systems under sub-synchronous resonance condition. Stator current and voltage signals of synchronous generator are used as damping signals. In present work, SSR has been artificially developed by generating 3-phase LLL-G fault. Further, in order to mitigate this sub-synchronous resonance problem, lead lag compensator with SSSC is adopted. For analyzing effectiveness of this method, a Simulink model is developed and through results it has been concluded that the proposed method SSSC with lead lag compensator gives improved results.Veröffentlicht
Ausgabe
Rubrik
Lizenz
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |