Optimum Setting of Distance Protection Scheme for HV Transmission Line
Schlagwörter:
high voltage transmission line, distance relay settings, Mho relay characteristics, PSCAD-EMTDCAbstract
Protective relays in a power system are used to detect system abnormalities and to execute appropriate commands to isolate swiftly only the faulty component from healthy system. One of the protective relay is the distance relay. When the fault occurs it is seen that large amount of current flows through the network. The distance relay detect the over current by measuring the impedance of the transmission line and send the tripping signal to the circuit breaker to isolate the power line. This paper focuses on determining the optimum setting and the performance of the distance relay when different types of faults occur in the system. The modeling and analysis of the test system with corresponding relay circuits have been carried out by using Power System Computer Aided Design PSCAD. From the simulation, it can be observed that the fault voltage, fault current, mho relay settings and its characteristics are consistent with those from the theoretical concept.
Veröffentlicht
Ausgabe
Rubrik
Lizenz
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
