Design and Simulation of Fuzzy Logic Based Speed Control of Electrical Vehicle with Induction Motor Taking Core Loss and Stray Load Losses into Account

Autori

  • Sadia Nahar Student
  • Md Kamrul Hassan Dr.
  • Mohammad Abdul Mannan Dr.

Parole chiave:

Electrical Vehicle (EV), Induction Motor (IM), Field Oriented Control (FOC), Fuzzy Logic Controller (FLC).

Abstract

In modern technology electrical differentials to design Electrical Vehicle are getting popular for its simplicity, faster response, accurate control capability and other facility. The controller design for the distinctive motors is a captivating and challenging work to acquire sought execution appropriately. For this different kind of controller is used to get accurate results. For Induction Motor it is very important to control the speed and torque to get smooth control application. Field Oriented Control aids the factor and empowers independent control of speed and torque by building up an autonomous relationship is created due to consideration of core loss and stray load losses while modeling Induction Motor which is neglected at most of the works. In this paper, with a better modeled IM Fuzzy Logic controller is accompanied to give it more accuracy and simplicity. The performances of the designed controller is accessed using MATLAB/Simulink where all the simulation results shows enough confirmation that smooth, exact and vigorous performance is achievable with the proposed controller.

Biografie autore

  • Sadia Nahar, Student
    Electrical and Electronics Engineering Department, Student
  • Md Kamrul Hassan, Dr.
    Electrical and Electronics Engineering Department, Assistant Professor
  • Mohammad Abdul Mannan, Dr.
    Electrical and Electronics Engineering Department, Professor, Head of UG Department

Dowloads

Pubblicato

2017-05-04

Fascicolo

V. 7 N. 1 (2017)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.