Design and Simulation of IRFOC for SPWM Inverter-fed Induction Motor Considering Core Loss and Stray Load Loss

Авторы

  • Mohammad Abdul Mannan Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Md. Ehtashamu Haque Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Rupak Kanti Dhar Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh

Ключевые слова:

Induction motor, Core loss, Stray Load loss, Field-oriented control, PI controller

Аннотация

The principle of field oriented control (FOC) or vector control (VC) of induction motors (IMs) is based on the control of both the magnitude and the phase of each phase current and voltage to achieve the decoupling control strategies between flux and torque. To control the flux and the torque precisely based on the FOC, core losses (CL) and stray load losses (SLL), which are generally neglected, should be considered in the mathematical model of IM to design the controller. In order to achieve the precise flux and torque control of IM, some of literatures have proposed to detuning method for FOC of IM to compensate the effects of CL and SLL. But it has seen that the mathematical modeling of detuning process is very complex which makes the complexity in the case of implementation also. In this paper, a novel FOC of IM with consideration of both CL and SLL is proposed. In this novel FOC of IM includes the decoupling control strategy which is easier than the detuning strategy. The effectiveness of proposed FOC of IM considering CL and SLL has been verified by the simulation work which has been done by using Matlab/Simulink. The simulation results show that the speed control with decoupling of flux and torque control for high performance of IM with considering CL and SLL based the proposed FOC can be achieved.Keywords: Induction motor, Core loss, Stray Load loss, Field-oriented control, PI controller

Загрузки

Дополнительные файлы

Опубликован

2014-07-09

Выпуск

Том 4 № 2 (2014)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.