Modeling and Control of A Grid Connected Wind Turbine Power System Under Variable Wind Speeds Using Doubly-Fed Induction Machine

Авторы

  • Goutham Gonti Department of Electrical Engineering, Tuskegee University, USA
  • Arbin Ebrahim Department of Electrical Engineering, Tuskegee University, USA
  • Gregory Murphy Department of Electrical Engineering, Tuskegee University, USA

Ключевые слова:

Wind turbine power system, Maximum Power Point Tracking (MPPT), Doubly-Fed Induction Machine (DFIM), Stator Voltage Oriented Control (SVOC), Grid Voltage Oriented Control (GVOC)

Аннотация

This paper focuses on the development of wind turbine system and extracting maximum power for variable speed constant frequency  grid connected wind turbine power system with doubly fed induction generator. A voltage oriented control scheme is used for the control of both rotor side and grid side circuit. Pitch control mechanism is implemented for the power limitation at a wind speed greater than the rated speed. The DFIM stator side is conncected to the grid directly, which delivers 70% of the total active power to the grid.  The rotor side of DFIM is connected to the grid through a back to back voltage source converter which delivers 30% of the active power to the grid. This wind turbine power system is modeled and simulated in the Matlab/Simulink.   Keywords: Wind turbine power system, Maximum Power Point Tracking (MPPT), Doubly-Fed Induction Machine (DFIM), Stator Voltage Oriented Control (SVOC), Grid Voltage Oriented Control (GVOC)Cite this Article  Goutham Gonti, Gregory Murphy and Arbin Ebrahim. Modeling and Control of A Grid Connected Wind Turbine Power System under Variable Wind Speeds using Doubly-Fed Induction Machine. Journal of Power Electronics and Power Systems. 2015; 5(3):      108–124p. 

Загрузки

Опубликован

2015-12-06

Выпуск

Том 5 № 3 (2015)

Раздел

Review Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.