Real Time Stability Index for Angle Stability Assessment Using Synchrophasor Data

Авторы

  • Alpesh Adeshara School of Engineering, R. K. University, Rajkot, Gujarat, India
  • Rajendrasinh Jadeja Electrical Engineering Department Marwadi Education Foundation, Rajkot, Gujarat, India
  • Praghnesh Bhatt Department of Electrical Engineering, CSPIT, Changa, Gujarat, India

Ключевые слова:

Phasor Measurement Unit, Power System Stability, Real Time Stability Index, Wide Area Monitoring System

Аннотация

The stress on the power transmission network has been increasing in recent time due to deregulated energy market, environmental constraints and limited investment in the transmission system. Hence, the power system is enforced to operate nearer to the stability limit and due to which it is required to estimate the system operating point as fast as possible with higher accuracy to maintain the system stability. The objective of this paper is to formulate Real Time Stability Index (RTSI) to obtain loadability of the power system. RTSI is determined from synchrophasor data which are obtained from phasor measurement unit placed at the bus terminals. The synchrophasor data are used to calculate the angle difference between two Thevenin equivalent sources which ensures loadability of the power system under given operating conditions. RTSI can be used effectively for accurate measurement and monitoring of loadability of the system. The results obtained from RTSI are evaluated for 29-bus Hydro-Quebec system under different operating condition.         Keywords:  Phasor Measurement Unit, Power System Stability, Real Time Stability Index, Wide Area Monitoring System Cite this Article Alpesh Adeshara, Rajendrasinh Jadeja, Praghnesh Bhatt. Real Time Stability Index for Angle Stability Assessment Using Synchrophasor Data. Journal of Power Electronics and Power Systems. 2015; 5(3): 65–75p. 

Загрузки

Опубликован

2015-10-12

Выпуск

Том 5 № 3 (2015)

Раздел

Research Articles

Лицензия

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.