Design of Active Power Based Relay Algorithm to Overcome Transient Instability: 220 kV Amravati Substation Case Study
Аннотация
This paper presents a new protective scheme, i.e. new relay algorithm to protect small scale generators against transient instability. The demand of installing small generators in distribution networks has been increased now-a-days. Small scale generators have low inertia constant. The inertia constant minimizes the frequency deviation which depends on the kinetic energy. Therefore frequency dynamics becomes slower and hence it increases the response time to react to fault events. Due to this, transient stability is considered as important concept for small scale generators. Due to occurrence of faults in power system, it hampers the transient stability. A new relay algorithm has been presented to prevent against transient instability for small scale generator. The active power based relay algorithm uses a generator active power to disconnect the generator from the system in three phase fault. Finally, the obtained results have been validated for the 220 kV Amravati Substation. Keywords: Transient stability, active power, active power based relay algorithm, out of synchronism, single to line ground fault, three phase faultCite this Article Sneha M. Walondre, N. D. Ghawghawe. Design of Active Power Based Relay Algorithm to Overcome Transient Instability: 220 kV Amravati Substation Case Study. Journal of Power Electronics and Power Systems. 2016; 6(2): 64–73p.
Опубликован
Выпуск
Раздел
Лицензия
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
