Performance Evaluation of Brushless DC Motor during Sinusoidal and Trapezoidal Back-EMF Waveform

作者

  • Rima M. Pujara Department of Electrical Engineering, V.V.P Engineering College, Rajkot, Gujarat, India
  • C. K. Vibhakar Department of Electrical Engineering, V.V.P Engineering College, Rajkot, Gujarat, India

摘要

Due to increasing popularity and wide application in the drive system BLDC motor is widely used. An undesirable signal in the brushless dc motor is a ripple in torque, which is in challenging motor control and some machine tools. This article represents the performance evolution of BLDC motor by using the sinusoidal and trapezoidal back EMF waveform for getting the efficient operation of BLDC motor drives. In sinusoidal back EMF waveform requires sinusoidal flux density; it also requires the high-resolution rotor position sensors. In trapezoidal back EMF waveform, it requires lower resolution sensor. Non-ideal properties of any source causes either phase current or back EMF waveform to depart from their entirely sinusoidal waves, which will typically give rise to an undesired pulsating torque components. In current waveform actually, inverter contribute to the torque ripple owing to the time harmonics. BLDC motor is an actually electronic commutated motor. Torque control is accomplished by challenging the back EMF waveform. BLDC motor is powered by the semiconductor devices such that MOSFET. The corresponding results have been comparing using MATLAB/ SIMULINK.  Keywords: BLDC motor, stator current, rotor angle, rotor position, ripple torque, stator back EMF and hall effect signalsCite this Article Rima M. Pujara, C.K. Vibhakar. Performance Evaluation of Brushless DC Motor During Sinusoidal and Trapezoidal Back-EMF Waveform. Journal of Power Electronics and Power Systems. 2016; 6(3): 14–22p.

下載

出版日期

2016-12-03

期號

卷 6 期 3 (2016)

分類

Research Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.