Development of Intermittent Gas Lift Optimum Time Module Using Automatic Pneumatic System

Forfattere

  • Rit Nanda School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
  • Shashank Gupta School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
  • Himanshu Shukla School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
  • Pulkita Rohilla School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
  • Kush Patel School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
  • Ajit Kumar N Shukla School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007

Nøgleord:

Intermittent, gas lift, production, time module, injection gas, valves

Resumé

 Artificial lift technique is used to bring hydrocarbons to the surface when they cannot come to the surface on their own. Gas lift is an artificial lift technique which is classified into continuous and intermittent gas lifts. Continuous gas lift is used when the hydrocarbon fills into the wellbore continuously but is not able to come to the surface while intermittent gas lift is used when the fluid flow into the wellbore is not continuous and the operating valve is not always submerged. At the heart of the latter system lies the time interval for the liquid to submerge the operating valve which in turn dictates the injection time module of the gas. This paper presents the studies done till date on gas lift techniques and specifically deals with the time control module of intermittent gas lift. The purpose of this paper is to present a robust system of time control that uses pneumatic test rig and develop automatic actuator using the pressure of the injected gas. The pressure, which is the only factor responsible for the opening and closing of the valve, controls the injection time interval and eliminates the monitoring of any other parameter. The expected pattern of produced fluid with frequency of injection matches with the experimental data which concludes the veracity of this system as an effective time module controller.Keywords: Intermittent, gas lift, production, time module, injection gas, valves 

Forfatterbiografier

  • Rit Nanda, School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
    Research Student
  • Shashank Gupta, School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
    Research Student
  • Himanshu Shukla, School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
    Research Student
  • Kush Patel, School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
    Research Student
  • Ajit Kumar N Shukla, School of Petroleum Technology Pandit Deendayal Petroleum University Gandhinagar 382007
    Associate ProfessorSchool of Petroleum Technology

Downloads

Yderligere filer

Publiceret

2012-04-28

Nummer

Årg. 2 Nr. 1 (2012)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.