Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling

著者

  • M. Vinitha Vasireddy Venkatadri Institute of Technology, Nambur, Guntur, A.P., India
  • M. Kedar Mallik Vasireddy Venkatadri Institute of Technology, Nambur, Guntur, A.P., India

キーワード:

Rapid prototyping、 fused deposition modeling、 burnishing、 ANOVA、 surface quality、 hardness

要旨

Quality of surface is one of the important factors to decide the performance of a manufactured product. Fused deposition modeling has been used to fabricate the stepped cylindrical samples for surface roughness evaluation. The axis of the stepped cylinder was oriented as horizontal to minimize the time of fabrication. Evidently the surface quality was not satisfactory due to the staircase effect. Using burnishing process, an attempt was made to improve the surface quality of the component at different speed and penetrations keeping the feed rate constant. The burnishing process causes increase in hardness on the outer layers of the cylinders. Hardness tests were conducted on the samples to study the effect of burnishing on hardness. ANOVA has been carried out to identify the influence of these parameters on the quality of surface and hardness. Maximum burnishing effect on surface roughness was reported at 720 rpm and on hardness at 480 rpm. It was found that the penetration has higher influence than the speed, on the burnishing process.Keywords: Rapid prototyping, fused deposition modeling, burnishing, ANOVA, surface quality, hardness Cite this Article Vinitha M, Kedar Mallik M. Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling. Journal of Production Research & Management. 2015; 5(1): 8–13p.

著者略歴

  • M. Kedar Mallik、 Vasireddy Venkatadri Institute of Technology, Nambur, Guntur, A.P., India
    Asst. Professor,Depertment of Mechanical Engineering,Vasireddy Venkatadri Institute of Technology,Nambur, Guntur Dist.Andhra Pradesh, India.

ダウンロード

発行日

2015-04-23

巻号

巻 5 号 1 (2015)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.