Different Aspects to Achieve the Hole Quality in Gun Drilling Machining

著者

  • Mohammed Hussien Rady Department of Mechanical Engineering, College of Engineering, Wasit University, Iraq

キーワード:

Dimensional quality、 gun drilling、 straightness、 surface finish

要旨

The manufacturing industry is always trying to fulfill the requirement of various industries and developing facilities to manufacture the designed parts. Many applications for various industries demand for deep drill where the ratio of depth of the hole to the diameter is greater than twenty. Gun drilling, B.T.A. drilling and ejector drilling are the three drilling processes to make deep holes. In the gun drilling process the pressurized oil is fed through a longitudinal hole made in the drill body and chips are forced out through a longitudinal V-shaped flute to a chip box. It is desirable to obtain the accuracy and quality of hole obtained in the gun drilling process. Only few research articles are available to study the accuracy and quality of hole obtained in the gun drilling process. The quality of hole produced is measured in terms of quality achieved in the following parameters: diametral tolerance, roundness of the hole, surface quality, straightness, location and attitude. The various factors are responsible to achieve these qualities such as; rotational motion provided to work-piece and/or cutting tool, tool wear, misalignment, feed rate, oil flow, depth of hole, material hardness, etc. Different aspects of these factors to achieve quality are presented in this article. This article will be useful for researchers and manufacturers to get an overall view of obtaining good hole quality and accuracy and associated factors to obtain them in the better manner. Cite this Article Mohammed Hussien Rady. Different Aspects to Achieve the Hole Quality in Gun Drilling Machining. Journal of Production Research and Management. 2016; 6(1): 34–38p.

ダウンロード

発行日

2016-05-04

巻号

巻 6 号 1 (2016)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.