Design and Implementation of Low Power 8-bit Level Crossing ADC

Autoři

  • Vaishali Gupta School of VLSI Design and Embedded Systems, National Institute of Technology, Kurukshetra, India
  • Anil Kumar Gupta School of VLSI Design and Embedded Systems, National Institute of Technology, Kurukshetra, India

Abstrakt

Implantable medical devices, electronic gadgets, wireless communication elements and many other such applications require low power electronic circuits. Analog to digital converters are essential part of most of such circuits. This paper presents a design of the level crossing analog to digital converter (LC-ADC) architecture. The proposed circuit and layout has been implemented in semi-conductor laboratory (SCL) 180 nm technology and its performance was evaluated using cadence virtuoso at supply voltage 0.8 V. DRC, LVS and PEX were performed using calibre. The pre- and post-layout simulation results have been compared using Hspice circuit simulator. The proposed ADC consumes 90 nW-184nW power in frequency range 0.005-3KHz and takes up 0.025 mm2 silicon area.   Keywords: Analog to digital converter (ADC), level crossing, quantization, comparator, 1 bit digital to analog converter (DAC)Cite this Article Vaishali Gupta1 and Anil Kumar Gupta. Design and Implementation of Low Power 8-bit Level Crossing ADC. Journal of VLSI Design Tools and Technology. 2016; 6(2): 33–43p.

Stažení

Další soubory

Publikováno

2016-07-05

Číslo

Vol 6 No 2 (2016)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.