Low Power RF QPSK MODEM Design

Forfattere

  • Rupam Goswami Worked for M Tech dissertation in MEMS Design Lab at CEERI.
  • Prashant Singh Worked for M Tech dissertation in MEMS Design Lab at CEERI.
  • Narendra Bahadur Singh Senior Principal Scientist,MEMS Design Lab, Central Electronics Engineering Research Institute,India.

Nøgleord:

QPSK RF MODEM, analog CMOS circuit design, phase shifter, envelope detector, filter

Resumé

System-level simulation including design of CMOS circuits for radio frequency QPSK MODEM targeting applications in 2.45 GHz industrial, scientific and medical (ISM) band has been presented in this paper. Based on the QPSK architecture, the MODEM consists of an analog mixer using a voltage multiplier, a 90 °phase shifter, delay circuits, a voltage adder and a filter to detect the information. A code reuse subsystem block consisting of Chebyshev filter type-II and lowpass RC filters is used prior to determine the envelope of the signal. The design will be useful in analog signal processing for its monolithic integration having higher speed and low cost. The MODEM circuit has been designed using SCL 1.2 µm CMOS foundry’s model parameters. It can operate at a supply voltage of 3.5 V. The circuit consumes power less than 3.5 mW and analog mixer performs a conversion gain of + 9.54 dB (< 10 dB). Simulink system-level simulation verifies the stepwise behavioral aspects of the QPSK architecture and proves that its CMOS circuit’s design presented in the paper shows similarity in the behavior with acceptable performance loss with respect to ideal case. 

Forfatterbiografi

  • Narendra Bahadur Singh, Senior Principal Scientist,MEMS Design Lab, Central Electronics Engineering Research Institute,India.
    In-charge MEMS,MS & RF ICs Design Lab, Senior Principal Scientist in CSIR-CEERI. 28 Years R&D experiences on Analogue,Digital,MS,RF & Memory CMOS ICs Design & Testing, Test Setup Dev. Image Code, IEEE-754 Processor, AES & DES ASICs Design, IC Process Technology, Simulation & Modelling of Devices,uC and IT areas.  

Downloads

Publiceret

2012-09-09

Nummer

Årg. 2 Nr. 2 (2012)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.