Automatic Switch cum Fuse IC for Low Voltage, Low Power, High Performance Current Conveyors

Authors

Keywords:

Signal Processing, MAIN IC, control signal, FUSE IC, Fuse Gate

Abstract

The paper focuses on the analysis of switch cum fuse IC in signal processing. In signal processing it is proposed to prevent the damage of main IC from the external electrical fluctuations which are common in -these days. The proposed FUSE IC is also able to act as fuse for many times for main IC so that it can prevent the damage. It’s like the work of MCB but a step ahead that we don’t need to set back the switch in ON position again as like the MCB. It work as a array of multiple fuse which are so arranged that as one fuse goes off automatically another comes in the action and hence the power supply to main IC remains uninterrupted and the main IC remain after all the electrical fluctuations. In current conveyors are capable of operating at supply of & 1.0 V with rail-to-rail input and output voltage swings.  Structure operates as linear circuit element and has a bandwidth of 60 MHz for 1.2 pm CMOS technology.

Author Biography

  • Ashutosh Tripathi, Amity University, Amity University
    Dept of ECEAmity University Rajathan

Downloads

Published

2011-07-22

Issue

Vol. 1 No. 1 (2011)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.