A High Performance Reference Circuit with Optimized Input Offset Operational Amplifier using Device Mismatch Model

Autores/as

  • Kapil K Rajput Semiconductor Bussiness Unit Tata Elxsi India Pvt. Ltd.
  • Sanjay Singh CSIR-Central Electronics Engineering Research Institute
  • Ravi Saini CSIR-Central Electronics Engineering Research Institute
  • Anil K Saini CSIR-Central Electronics Engineering Research Institute

Palabras clave:

CMOS bandgap reference, MOSFET mismatch modeling, operational amplifier, input offset voltage

Resumen

In this paper, author describes a band gap reference (BGR) circuit, having reference voltage 1.20V with maximum temperature coefficient of 63 ppm/0C in temperature range of –40 to 120  0C. The circuit operates in range of supply voltage, 3.0V to 3.6V. An operational amplifier (op-amp), whose input offset voltage is reduced upto 892 µV using Pelgrom’s device mismatch model is used in BGR. The power supply rejection ratio of circuit is improved at higher frequency and achieved 36 dB at 1 MHz. The circuit having area of 0.45 mm2 in 0.35 µm CMOS technology is designed, fabricated and tested successfully.

Biografía del autor/a

  • Kapil K Rajput, Semiconductor Bussiness Unit Tata Elxsi India Pvt. Ltd.
    Analog Circuit Design EngineerSemiconductor Bussiness UnitTata Elxsi India Pvt. Ltd.
  • Sanjay Singh, CSIR-Central Electronics Engineering Research Institute
    IC Design GroupCSIR-CEERIPilani
  • Ravi Saini, CSIR-Central Electronics Engineering Research Institute
    IC Design GroupCSIR-CEERIPilani
  • Anil K Saini, CSIR-Central Electronics Engineering Research Institute
    IC Design GroupCSIR-CEERIPilani

Descargas

Publicado

2013-04-15

Número

Vol. 3 Núm. 1 (2013)

Sección

Research Articles

Licencia

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.