Enhancement in RMPA Parameters using Slotted Rhombus Connected Square Shaped Antenna with left Handed Metamaterial

Autori

  • RamKishor Sharma Department of Electronics and Communication Engineering, RJIT, Gwalior, India
  • Mahendra Kumar Pandey Department of Electronics and Communication Engineering, RJIT, Gwalior, India
  • Sandeep Kumar Agrawal Department of Electronics and Communication Engineering, RJIT, Gwalior, India

Abstract

In this paper, rectangular micro strip patch antenna (RMPA) along with metamaterial which has design of “slotted rhombus connected with rectangular shaped cover structure” is proposed at height of 3.2 mm from the ground plane. The RMPA with proposed metamaterial structure is designed to resonate at 2.7 GHz frequency. This work is mainly focused on increasing the potential parameters of micro strip patch antenna. Proposed metamaterial design structure significantly reduces the return loss and increases the bandwidth and directivity of the antenna as compared to RMPA alone. The bandwidth is increased up to 27.9 MHz in comparison to RMPA alone. The return loss of proposed antenna is reduced by 18 dB by incorporating the proposed metamaterial structure. For simulation purpose, CST-MWS software has been used.  Keywords: Rectangular micro strip patch antenna, metamaterial, bandwidth, return lossCite this Article Ram Kishor Sharma, Mahendra Kumar Pandey, Sandeep Kumar Agrawal. Enhancement in RMPA Parameters using Slotted Rhombus Connected Square Shaped Antenna with Left Handed Metamaterial. Journal of VLSI Design Tools & Technology. 2017; 7(1): 49–54p.

Dowloads

Pubblicato

2017-04-06

Fascicolo

V. 7 N. 1 (2017)

Sezione

Research Articles

Licenza

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.