Methodology of Standard Cell Library Design in .LIB Format

著者

  • Arindam Sadhu Department of Electronics & Communication Engineering - Microelectronics & VLSI, Heritage Institute of Technology, Kolkata, India
  • Pritam Bhattacharjee Department of Electronics & Communication Engineering - Microelectronics & VLSI, Heritage Institute of Technology, Kolkata, India

キーワード:

250 nm technology GPDK、 standard-cell library design、 .lib formulated characterization

要旨

The importance of standard cell library design methodology is growing with very-large-scale integration (VLSI) technology advancement due to its usage in VLSI EDA synthesis flows. In this paper, to best of our knowledge and information in any published literature no systematic method of standard cell and creating appropriate co-laterals. In this paper the standard cell design methodology, layout topology, methodology for creating characterized timing table has been developed using 250 nm technology GPDK. This method can be easily reused in deep sub-micron technology for appropriate co-laterals. In addition a new methodology of reusing standard cell for full custom design has been proposed in this paper.

著者略歴

  • Arindam Sadhu、 Department of Electronics & Communication Engineering - Microelectronics & VLSI, Heritage Institute of Technology, Kolkata, India
    B-Tech (Electronics & Communication Engineering) and M-Tech (VLSI) from West Bengal University of Technology and pursuing Ph.D at West Bengal University of Technology under Dr. Debashis De, Associate Professor, Computer Science Engineering department, WBUT.
  • Pritam Bhattacharjee、 Department of Electronics & Communication Engineering - Microelectronics & VLSI, Heritage Institute of Technology, Kolkata, India
    B-Tech (Electronics & Communication Engineering) and M-Tech (VLSI) from West Bengal University of Technology

ダウンロード

発行日

2014-03-28

巻号

巻 4 号 1 (2014)

セクション

Case Study

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.