CMOS Gm-C IF Filter using SCA for Dual Band Receiver

著者

  • Kehul A Shah Department of Electronics and Communication, SPCE, Visnagar, Gujrat, India
  • N M Devashrayee Department of Electronics and Communication (VLSI Design), Nirma University, Ahmadabad, Gujrat, India

要旨

This paper deals with design of folded cascode OTA-C filter, which works for frequencies for RF application, based on transistor sizing methodology and simulation results are performed using SPICE software and BSIM3V3 model for CMOS 0.18 μm process, show that the designed folded cascode OTA has a 52 dB DC gain and provides a unit gain bandwidth of around 400 MHz. Design of CMOS Gm-C 2nd order Biquad filter implementation using OTA, operating at center frequency 70 and 10.6 MHz. The filter can be operated at center frequency of 70 MHz under 1.8 V power supply and is suitable for intermediate frequency (IF) range in most of the wireless systems operating at 900 MHz GSM and at 88–108 MHz FM. With SCA, it tuned for required band operation.   Keywords: Folded cascode OTA, gm/ID methodology, active filters, S-parameter, SCA, (OTA-C) filters, GSM, FM Cite this Article Shah Kehul A, Devashrayee NM. CMOS Gm-C IF Filter using SCA for Dual Band Receiver. Journal of VLSI Design Tools and Technology. 2015; 5(3): 18–36p.

ダウンロード

発行日

2015-10-12

巻号

巻 5 号 3 (2015)

セクション

Research Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.