Design of Low Power Folded Cascode Current Mirror CMOS OTA and Implementation of 2nd Order Gm-C IF Filter with Analysis of S-Parameter
Ключевые слова:
Folded cascode OTA, gm/ID methodology, active filters, S-parameter, Smith Chart, (OTA-C) filtersАннотация
This paper deals with design and optimization of a cascode current mirror folded cascode operational transconductance amplifier is done in order to optimize MOS transistor sizing. The design of folded cascode OTA, which works for frequencies that lead to a base band circuit design for RF application, is based on transistor sizing methodology and Simulation results are performed using SPICE software and BSIM3V3 model for CMOS 0.18μm process, show that the designed folded cascode OTA has a 52dB DC gain and provides a Unit gain bandwidth of around 400MHz. In this paper the design of CMOS Gm-C 2nd order Biquad Filter implementation using OTA, operating at center frequency 70MHz.The simulated performance shows that the filter provides a Q of 23. The filter can be operated at center frequency of 70MHz under 1.8V power supply and is suitable for intermediate frequency (IF) range in most of the wireless systems operating at 900MHz.
Опубликован
Выпуск
Раздел
Лицензия
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
· I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
· I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
· I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
· I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. _______________
We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |
