Low-Voltage Low-Power Single Supply Rail-to-Rail High Resolution Comparator in 0.18 µm CMOS Technology

作者

  • Anil K. Saini CSIR-Central Electronics Engineering Research Institute
  • Priyanka Dwivedi CSIR-Central Electronics Engineering Research Institute
  • Sanjay Singh CSIR-Central Electronics Engineering Research Institute

##semicolon##

Rail-to-rail##common.commaListSeparator## charge pump##common.commaListSeparator## dynamic compartor##common.commaListSeparator## non-overlap clock##common.commaListSeparator## low voltage

摘要

This paper presents an absolute input rail-to-rail ultrahigh-resolution comparator for low-voltage low-power applications. To enhance the input range rail-to-rail, the proposed comparator utilizes dynamic configuration with a MOSFET-only clock booster to supply a boosted voltage for pre-amplifier stage. Cadence SPICE simulations of the proposed comparator in a 0.18 μm CMOS process confirm the rail-to-rail input range with a supply voltage of 1.2 V with a decision time less than 9 ns. The dynamic power consumption of the proposed comparator is 59.3 μW with a clock frequency of 1 MHz.  

作者簡介

  • ##submission.authorWithAffiliation##
    ScientistIC Design GroupCEERI
  • ##submission.authorWithAffiliation##
    Project AsistantIC Design GroupCEERI
  • ##submission.authorWithAffiliation##
    ScientistIC Design GroupCEERI

下載

出版日期

2012-12-20

期號

卷 2 期 3 (2012)

分類

Research Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.