A New Sub-1 Volt Reference for Low Voltage Application Based on MOSFET’s Threshold Voltage Extractor

作者

  • Anil Kumar Saini CSIR-Central Electronics Engineering Research Institute
  • Megha Agarwal Thapar University, Patiala, India

##semicolon##

threshold voltage extractor##common.commaListSeparator## low-voltage##common.commaListSeparator## process variation##common.commaListSeparator## CMOS bandgap voltage reference

摘要

A CMOS voltage reference circuit featuring MOS transistors threshold voltage extractor has been developed. The circuit implemented using 0.35µm CMOS AMS process generates a reference of 574 mV for a power supply of 3.3V with 726µW power consumption. The circuit presents a variation of 43 ppm/ºC for the –10 to –110ºC temperature, and 18.6 dB PSRR at 1 KHz. A vital analytical approach is presented to provide a universal design guideline.

作者簡介

  • ##submission.authorWithAffiliation##
    ScientistIC Design Group 
  • ##submission.authorWithAffiliation##
    Student

下載

出版日期

2013-04-15

期號

卷 3 期 1 (2013)

分類

Research Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.