Physical, Chemical and Mechanical Properties of Fiber Extracted from Yucca gloriosa, L.

作者

  • Subhashini Balaji

##semicolon##

Fiber##common.commaListSeparator## Yucca gloriosa##common.commaListSeparator## density##common.commaListSeparator## linear density##common.commaListSeparator## water sorption##common.commaListSeparator## tensile properties

摘要

Yucca gloriosa is an evergreen shrub with common name “Spanish dragger.” It was collected from the Nilgiris hills. The fiber obtained from Y. gloriosa leaves is used for making ropes, baskets and mats. So this study shows that factors such as length, diameter, density, linear density, water sorption, lignin, cellulose estimation, load at break, extension at break, tenacity at break, tensile strain at break and tensile stress at break of Y. gloriosa, L. was found. On the microscopic analysis of the leaf, cross section samples of sclerenchyma cells were found. The plant showed yield and quality of plant fibers, which make them suitable for uses like composite, textile, geotextile, pulp, paper and other industrial uses.

作者簡介

  • Subhashini Balaji
    Department of Botany

下載

出版日期

2013-05-06

期號

卷 3 期 1 (2013)

分類

Research Articles

授權條款

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

_______________

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.