Tensile Behavior of Aluminum–Cenosphere Metal Matrix Composite by Stir-Casting Route

Autoři

  • Saravanan Varatharaju
  • A. Shanmugasundaram Assistant Professor, Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, India
  • Dr. P. R. Thyla Associate Professor,Department of Mechanical Engineering, PSG College of Technology, Coimbatore, India

Klíčová slova:

Aluminum, cenospheres, fly ash, stir-casting, MMC

Abstrakt

 The invention of new materials widens the scope for usage in contemporary material science and their development; the properties of metal matrix composites (MMCs) can be modified to suit the application. The present investigation focuses on dispersing the cenosphere particles into aluminum alloy (AA6063) to produce the composite. The major constituents in cenosphere are refractory oxides like silica, alumina and iron oxide. The manufacturing method adopted for producing this MMC was stir-casting method and the setup for this was fabricated. The proper mixing of particles was ensured with the help of chemical analysis and scanning electron microscopy. The important mechanical property, tensile strength, was evaluated for various percentages of cenospheres.  Keywords: Aluminum, cenospheres, fly ash, stir-casting, MMC 

Stažení

Publikováno

2012-09-08

Číslo

Vol 2 No 2 (2012)

Sekce

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.