Thermo-Mechanical Analysis of Aluminium and Mild Steel during Friction Drilling

Forfattere

  • R. N. Todkar Department of Mechanical Engineering, Genba Sapanrao Moze Institute of Technology, Pune, Maharashtra, India
  • S. R. Londhe Department of Mechanical Engineering, Genba Sapanrao Moze Institute of Technology, Pune, Maharashtra, India
  • R. R. Ligade Department of Mechanical Engineering, RMD Sinhgad School of Engineering, Pune, Maharashtra, India
  • S. G. Varpe Department of Mechanical Engineering, Genba Sapanrao Moze Institute of Technology, Pune, Maharashtra, India

Nøgleord:

Aluminium, deformation, mechanical testing, mild steel, thermal stress

Resumé

Friction drilling is a non-machining method of making holes in metal, in which the material is melted by adding high pressure and friction energy. Friction drilling uses very heat resistant cemented carbide, pointed but not sharp object. This device is pressed against a target material with both high rotational speed and high pressure. The process reshapes all thematerial so that no material is lost. The sleeve that is about three times longer than the original diameter of the target material makes it possible to make very strong bolt joints in thin material. The objective of this paper is to study the thermo mechanical analysis of aluminium and mild steel during friction drilling, experimentally. The tool speed used is in therange of 2000 to 5000 rpm and feed rate in the range of 50 to 110 mm/min. Two different test materials, aluminium and MS-0.18C are used for investigation. Coupled field analysis is used to do analysis in Ansys. This study aims to provide deeper understanding of the frictiondrilling process.Cite this ArticleTodkar RN, Londhe SR, Ligade RR etal. Thermo-Mechanical Analysis ofAluminium and Mild Steel duringFriction Drilling. Trends in MechanicalEngineering & Technology. 2016; 6(2):18–24p.

Forfatterbiografi

  • R. N. Todkar, Department of Mechanical Engineering, Genba Sapanrao Moze Institute of Technology, Pune, Maharashtra, India
    Master in heat power engineering.

Downloads

Yderligere filer

Publiceret

2016-06-20

Nummer

Årg. 6 Nr. 2 (2016)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.