Effect of Polarity on Metal Transfer in Submerged Arc Welding

Autor/innen

  • Ravinder Pal Singh Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
  • R. K. Garg Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
  • Dinesh Kumar Shukla Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India

Schlagwörter:

Submerged arc welding, polarity, parametric effect, Metal transfer, Transients

Abstract

Essential requirement of a welding process is to obtain a welded joint with desired weld bead parameters and mechanical properties. The major challenge in a welding process is to achieve control over the weld metal properties which are significantly affected by polarity as it affects the extent of heat generated at electrode wire and work in the welding process. This paper evaluates the effect of polarity on metal transfer through voltage current transients in submerged arc welding.Keywords: Submerged arc welding, polarity, parametric effect, metal transfer, transientsCite this Article Ravinder Pal Singh, Garg RK, Dinesh Kumar Shukla. Effect of Polarity on Metal Transfer in Submerged Arc Welding. Trends in Mechanical Engineering & Technology (TMET). 2015; 5(2): 42–48P.

Autor/innen-Biografien

  • Ravinder Pal Singh, Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
    Ph.D Research ScholarIndustrial and Production Engineering Department
  • R. K. Garg, Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
    Professor
  • Dinesh Kumar Shukla, Industrial and Production Department, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India
    Associate professor

Downloads

Veröffentlicht

2015-05-21

Ausgabe

Bd. 5 Nr. 2 (2015)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.