Fuzzy Modeling to Specify Various Machining Parameters in Electrical Discharge Machining (EDM) of INCONEL625 Using Copper Electrode

Authors

  • P M Radia Department of Mechanical Engineering, Atmiya Institute of Technology & Science, Rajkot, Gujarat, India
  • M S Kagathara Department of Mechanical Engineering, Atmiya Institute of Technology & Science, Rajkot, Gujarat, India
  • H G Acharya Department of Mechanical Engineering, Atmiya Institute of Technology & Science, Rajkot, Gujarat, India

Keywords:

Fuzzy modeling, EDM, MRR, TWR

Abstract

Condition monitoring of the machining process is very important in today’s precision manufacturing, especially in the electrical discharge machining (EDM). This paper shows a fuzzy-based algorithm for prediction of material removal rate (MRR) and tool wear ratio (TWR) in the electrical discharge machining (EDM) processes. In this system peak current (Ip), voltage (V) and duty cycle (D) are the input parameters and output parameters are MRR and TWR. The proposed fuzzy model in this study provides a more precise and easy selection of EDM input parameters, respectively for the required MRR and TWR which leads to better machining conditions and decreases the machining costs. The fuzzy modeling of EDM was able to predict the experimental results with very high accuracies.Cite this Article Radia PM, Kagathara MS, Acharya HG. Fuzzy modeling to specify various machining parameters in electrical discharge machining (EDM) of INCONEL625 using Copper Electrode. Trends in Mechanical Engineering & Technology. 2016; 6(1): 35–42p.

Downloads

Additional Files

Published

2016-02-15

Issue

Vol. 6 No. 1 (2016)

Section

Research Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.