A Review on Investigating the Effect of Machining Parameters on Surface Roughness, Machining Forces and Tool Wear in Turning of AISI 4340

Authors

  • Jignesh Khara Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Shivang Jani Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • G.D. Acharya Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India.

Keywords:

Surface roughness, tool wear, interface temperature, AISI4340, machining forces

Abstract

Now a day due to the advent of technology, newer materials are coming day by day in the market, due to which it is difficult for an operator to choose the proper cutting parameter for a tool-workpiece combination to get required surface finish and dimensional precision. The main problem associated with turning process is surface roughness and tool wear, which affect the quality of turned part. The main objective of this study is to investigate and evaluate the effect of different cutting parameters (cutting speed, feed rate and depth of cut), cutting conditions (dry, wet, etc.) and interface temperature on surface roughness and tool wear during turning of AISI 4340 alloy steel.Cite this ArticleJignesh Khara, Shivang Jani, AcharyaGD. A Review on Investigating theEffect of Machining Parameters onSurface Roughness, Machining Forcesand Tool Wear in Turning of AISI4340. Trends in MechanicalEngineering & Technology. 2017; 7(1):19–25p.

Downloads

Published

2017-02-27

Issue

Vol. 7 No. 1 (2017)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.