Optimization of Green Sand Casting Process Parameters by Artificial Neural Network

Auteurs-es

  • Priyank V. Parekh Department of Mechanical Engineering, Shantilal Shah Government Engineering College, Bhavnagar, Gujarat, India
  • J. A Vadher Government Engineering College, Palanpur, Gujarat, India

Mots-clés :

ANN, casting defects, NN tool, blow holes, porosity

Résumé

In this paper, artificial neural network (ANN) is used to train the network which can predict the casting defect. L27 orthogonal array is used as input matrix for training of neural network. NN tool is used to train the network for prediction of defects. Major defects observed on shop floor were; misrun, blowholes, inclusions and porosity. Moisture, permeability, LOI, compressive strength, volatile content, vent holes, pouring time, pouring temperature, mould hardness were the major process parameters identified. Back propagation neural network is used in this paper to train the network. The network is trained to prepare the model which forecast the casting defects.Cite this ArticleParekh Priyank V. Optimization of Green Sand Casting Process Parameters by Artificial Neural Network (ANN). Trends in Mechanical Engineering & Technology. 2016; 6(2): 75–80p.

Téléchargements

Publié

2016-07-19

Numéro

Vol. 6 No. 2 (2016)

Rubrique

Research Articles

Licence

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.