Experimental Investigation of PTFE Composite Material with Different Filler Materials

Autor/innen

  • S. G. Varpe Department of Mechanical Engineering, GSMIT, Pune, Maharashtra, India
  • R. N. Todkar Department of Mechanical Engineering, MIT College of Engineering, Pune, Maharashtra, India
  • S. R. Londhe Department of Mechanical Engineering, GSMIT, Pune, Maharashtra, India
  • R. R. Ligade Department of Mechanical Engineering, RMD Singhad School of Engineering, Pune, Maharashtra, India

Schlagwörter:

Coefficient of friction, orthogonal array, pin-on-disc apparatus, PTFE composite, tribometer, wear

Abstract

Experimental investigation of PTFE (Polytetrafluroethylene) composites with different filler materials such as glass fiber, molybdenum disulphide, graphite carried is out in this study. This study exhibits tribological properties such as wear and coefficient of friction of PTEF composite material. Pin on disc tribometer is used to conduct the wear on PTFF polymer composite. Test is conducted on 10 mm diameter PTFE pin against EN31 counter face. Wear and friction experiment were carried out on the pin-on-disc apparatus at ambient condition. Variables like; load 1 to 3 kg, sliding velocity 0.5 to 2 m/s, glass filled percentage, graphite percentage and molybdenum percentages were studied. In this study, a comparative analysis of three different combinations of materials studied for wear are; PTFE + 25% glass filled, PTFE + 25% glass filled + 5% graphite, PTFE + 25% glass filled + 5% molybdenumdisulphide.Cite this Article Varpe SG, Todkar RN, Londhe SR et al. Experimental Investigation of PTFE Composite Material with Different Filler Materials. Trends in Mechanical Engineering & Technology. 2016; 6(2): 34–42p.

Downloads

Zusätzliche Dateien

Veröffentlicht

2016-06-20

Ausgabe

Bd. 6 Nr. 2 (2016)

Rubrik

Research Articles

Lizenz

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.