Review on Double Girder Bottom Pulley Hook Block for EOT Crane

著者

  • Naresh D. Chavda Department of Mechanical Engineering, A.D. Patel Institute of Technology, New V.V. Nagar, Anand, Gujrat, India

キーワード:

EOT、 hoisting mechanism、 bottom pulley hook block

要旨

The design of crane is under the standard IS 3177 for steel plants and IS 4137 for power plants crane. Classification of crane is based on operating cycle or working cycle of crane as per IS 13834. In which the maximum and heavy duty working cycle of crane is considered as steel plant crane. Electric overhead cranes (EOT) are widely used as material handling equipment in industries. Among all its components, bottom pulley hook block is very critical for effective functioning of the crane. Hence, its selection must be based on cost criteria and feasibility. It should be designed considering factor of safety and which results in error free output. Design of bottom pulley hook block is possible with 8 pulley and assembled with single axle or 2 pairs of 4 pulley with single axle using IS 4137 and IS 3177.Keywords: EOT, hoisting mechanism, bottom pulley hook blockChavda Naresh D. Review on Double Girder Bottom Pulley Hook Block for EOT Crane. Trends in Mechanical Engineering and Technology. 2015; 5(2): 49–55p.

著者略歴

  • Naresh D. Chavda、 Department of Mechanical Engineering, A.D. Patel Institute of Technology, New V.V. Nagar, Anand, Gujrat, India
    Mechanical engineering department

ダウンロード

発行日

2015-07-08

巻号

巻 5 号 2 (2015)

セクション

Review Articles

ライセンス

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.