Real-Life Demonstration on the Surface-Driven Capillary Flow in Microfluidic Devices

Forfattere

  • Subhadeep Mukhopadhyay Department of Electronics and Computer Engineering, National Institute of Technology Arunachal Pradesh, Ministry of Human Resource Development (Government of India), Yupia, Arunachal Pradesh, India

Nøgleord:

Capillary flow, microfluidic device, colour-image, gray-scale-image

Resumé

In this research paper, glass and PMMA are chosen as materials to fabricate the microfluidic devices due to the optical transparency of these materials. The microfluidic devices are fabricated by the maskless lithography (non-contact lithography), hot embossing lithography (contact lithography), indirect bonding technique, and direct bonding technique. The surface-driven capillary flow is recorded corresponding to each microfluidic device by a CMOS camera. The colour-images are compared with the gray-scale-images for proper visualisation on any microfluidic flow. The comparison between colour-images and gray-scale-images is a novel approach in this research paper.  Cite this Article Subhadeep Mukhopadhyay. Real-Life Demonstration on the Surface-Driven Capillary Flow in Microfluidic Devices. Trends in Opto-Electro & Optical Communications. 2016; 6(2): 8–17p.

Downloads

Publiceret

2016-09-17

Nummer

Årg. 6 Nr. 2 (2016)

Sektion

Review Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.