Modeling of Voltage Buffer and Memristor Voltage Buffer Using 180 nm Technology

Forfattere

  • Herman Al Ayubi Department of Electronics and Communication Engineering (VLSI Design), School of ICT, Gautam Buddha University, Greater Noida, U.P, India
  • Navaid Z. Rizvi Department of Electronics and Communication Engineering (VLSI Design), School of ICT, Gautam Buddha University, Greater Noida, U.P, India
  • Piyush K. Mishra Department of Electronics and Communication Engineering (VLSI Design), School of ICT, Gautam Buddha University, Greater Noida, U.P, India

Nøgleord:

Simpler Voltage Buffer (VB), Memristor – Voltage Buffer (MVB), Single Memristor- Voltage Buffer (SMVB), Double Memristor-Voltage Buffer (DMVB), Common Drain Amplifier (CDA), Source Follower (SF).

Resumé

Objective of this paper is the analysis of voltage buffer and is referred to as a common drain amplifier or that can be considered as a source follower also. It compares the result of simple voltage buffer that results with the memristor inbuilt in the same schematic circuit of voltage buffer. Memristor is considered as a fourth existing component after the resistor, capacitor and an inductor proposed by Dr. L. O. Chua who defined it as the relationship between the flux and charge which is based upon ohm’s law and it behaves as both, feature of linear resistor and non-linear characteristic.   Terminology: Simpler voltage buffer (SVB), Memristor voltage buffer (MVB), Single memristor voltage buffer (Single Memristor Voltage Buffer), Double memristor voltage buffer (DMVB), Common drain amplifier (CDA), Source follower (SF)Cite this Article Al Ayubi et al. Modeling of Voltage Buffer and Memristor Voltage Buffer Using 180 nm Technology. Journal of VLSI Design Tools and Technology. 2016; 6(1):

Downloads

Publiceret

2016-02-15

Nummer

Årg. 6 Nr. 1 (2016)

Sektion

Research Articles

Licens

Declaration and Copyright Transfer Form

(to be completed by authors)

 

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

·         I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.

·         I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).

·         I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.

·          I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. _______________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.